top of page

Eucalyptus Cladocalyx | Clado

Clado has few defects and is prized for its durability.

 

Scientific Name: Eucalyptus Cladocalyx

 

Preferred Common Names: Clado (Common Australian name - Sugar Gum) 

Description

 

The Eucalypt originates in South Australia, it has been planted in South Africa since the mid 1800's.  It has been planted widely through Southern Africa and has been found to grow successfully for saw log production in the Western Cape Province.

 

The species is typically found in privately owned farm woodlots, windbreaks and tree lined avenue’s.

 

The species yields a beautiful blond to tan, yellow to brown, honey colour timber.  It is classified as a "Class 1 Heavy Hardwood" of exceptional durability and is well suited to heavy marine applications and external building applications. It, unlike many other Eucalypts, is relatively stable in drying, if cut correctly, free of pith.  Timber harvested from Eucalyptus Cladocalyx has little defect and is prized for its durability. 

Uses

 

It is particularly suited to situations requiring high strength where appearance is also important.  If left untreated externally it will turn a silvery grey colour overtime.  It has a fine interlocked grain.

The timber as with some other hardwoods, is known to sometimes leach.  It is suggested to use stainless steel fastenings and brackets when used externally in high end carpentry applications as the tannins (See link to Tannis) in the timber react with ferrous metals which can cause dark markings.  Any initial markings left from leaching or a reaction with ferrous metals will disappear over time.

 

The species is very well suited as a replacement to previously imported tropical Hardwood used in external applications such as Balau, Ekki, Tali, Greenheart, Massranduba etc.  It is far superior in external applications to the likes of Meranti, Iroko, Mahogany, Limbali, Sapele and Garapa.

 

  • Decking

  • Exterior Stairs

  • External Cladding

  • Docking Blocks

  • Harbour Fenders

  • Pergolas

  • Outdoor Furniture

  • Bollards

  • Fencing

Properties

 

An extract from " The Mechanical Properties of Timbers - With particular reference to those grown in the Republic of South Africa" published by C.H. Banks (South African Forestry Research Institute).

Dry Mass per kg

 

Modulus of rupture

 

Fibre stress at P.L. (Point Load)

 

Modula's of elasticity

 

Compression parallel to grain

 

Compression perpendicular to grain

 

 

 

Shear parallel to grain

 

Impact Bending

-

 

-

 

-

 

-

 

-

 

-

 

-

 

-

 

-

1005 kg/m3 (Wet density 1200 - 1300kg/m3)

 

140 MPa

 

81 MPa

 

18415 MPa

 

78.3 MPa (Maximum crushing strength)

 

39.1 MPa (Stress at 2.54mm deflection)

 

19.6 MPA (Stress at Point Load)

 

16.5 MPa (Maximum shearing strength)

 

30.8 MPa (Toughness)

bottom of page